The Common Canon Digital Camera Err 99 Repair Problem is Not What You Think

The Canon EOS and Digital Rebel Err 99 error message has been plaguing EOS DSLR camera owners for quite some time now. There is this consensus that Canon is aware of what the issue is and is misleading customers regarding the real meaning of the error message. Here's the real answer, and it is not about to make you ecstatic, my apologies.

Err 99 is a common error message on Canon EOS digital cameras that means there is some type of bad thing going down but the camera isn't sure exactly what! Error 99 is not a specific error code that can be used to point out an exact problem or a design failing with the camera!

As an example, these are error messages from page 171 of the Canon EOS 10D manual :
Err 01 - Clean the lens contacts
Err 02 - There is a problem with the CF card...
Err 04 - The CF Card is full...
Err 05 - Something is obstructing the built in flash....
Err 99 - An error apart from the above...

It's the same as the old Canon E:18 code that essentially means there's an issue with the lens. Thousands of people went off the deep end with this code and thought it meant it had been a lens design flaw and Canon knew all about it. Canon subsequently stopped using the E:18 message in favour of "Lens error, restart camera" and other messages as an alternative.

If you've got any DSLR camera you'll at some specific point in time ; if you use the camera enough, a failure of the shutter box assembly. This is to all intents and purposes the sole moving part of the camera and so it'll one day wear out and break.

Canon entry level Digital Rebel cameras have less rugged shutter box assemblies compared to the pro counterparts, and can wear out after ten to fifteen thousand shots. If you take plenty of photographs this might only last you a couple years. A Canon EOS pro DSLR has a shutter box rated as high as two hundred to three hundred thousand shots which would probably last the average entry level user their entire lifetime.

If a pro photographer has an Error 99 message on one of his or her cameras, they realize their shutter box is starting to fail because of normal useage; they do not blame Canon. Why is it that when consumers see this error message they blame Canon and want to be paid? Cant we accept that the moving part of the camera has a limited lifespan and will one day need to be replaced? Do we blame a car manufacturer when things break on our automobiles? No, we just pay hundreds or maybe thousands to have it fixed.

If you have a Canon Rebel DSLR with the Error 99 problem there are numerous things you can try first before paying for Canon Error 99 repair to have it corrected. You can try cleaning the lens and body metal contacts using a pencil eraser, and you can try shooting with a new storage chip. If these things do not work you probably will need to start looking for Canon DSLR Error 99 repair. It's not a design flaw, its just normal wear from use.
Olympus EPL3 Digital SLR Camera Bundles

We thank you taking the time to visit our website
and hope that we were able to assist you in your search for the information that you are looking for.
We do realize that with many articles written, it is possible
and even likely that you will find errors along the way.
We would appreciate you using the "contact us" page to let us know if you come across any mistakes
in our articles or if you simply have some ideas for articles that you would like to see in the future.
Thanks again for taking the time to visit,
we hope you have enjoyed it and hope that you will visit us again someday very soon.